Network Interface Modules

Sub-Categories

maxiflex - m1588d1600

Maxiflex Canberra AB96 NIM

Maxiflex NIM for interface to Canberra Harwell AB96, iCAM and G64
radiological monitors. A mixture of up to 32 of these Harwell monitors types may be accommodated on a single RS485 multidrop network. (Supersedes M1587 AB 96 NIM)

Read More »
maxiflex - m1580a1600

Maxiflex Dual Serial NIM

Maxiflex Dual Modbus NIM. 2 Independent RS232/485 ports isolated. Supports Modbus Master, Modbus Slave and Conet/s. Programmable for other custom protocols.

Read More »
Image not available

Maxiflex GSM NIM

Maxiflex Single GSM NIM. Connection cellular Networks using Integral GSM Modems. Connects to CPU via serial connection

Read More »
maxiflex - m1588d1600

Maxiflex Harwell AB96 NIM

Maxiflex NIM for interface to Canberra Harwell AB96, iCAM and G64
radiological monitors. A mixture of up to 32 of these Harwell monitors types
may be accommodated on a single RS485 multidrop network. (Supersedes M1587 AB 96 NIM)

Read More »
maxiflex - m1588d1600

Maxiflex Harwell AB96 NIM

NIM for Interface and data acquisition from Harwell AB96 Alpha/Beta monitors. AB 96 Protocol implimented on the NIM Serial Port. Superceded by M1588

Read More »
maxiflex - m1588d1600

Maxiflex Harwell AB96 NIM

Maxiflex NIM for interface to Canberra Harwell AB96, iCAM and G64
radiological monitors. A mixture of up to 32 of these Harwell monitors types may be accommodated on a single RS485 multidrop network. (Supersedes M1587 AB 96 NIM)

Read More »
maxiflex - m1591b1600

Maxiflex Modbus/TCP Ethernet NIM

Maxiflex Single Programmable ETHERNET NIM. Single UTP Port; single TCP/IP connection. Modbus Serial over Ethernet or Modbus/TCP Slave Protocol support. Programmable in Forth only.

Read More »
maxiflex - m1593a1600

Maxiflex RIOc Conet Remote IO Link Module

The M1593A Remote I/O Conet Link (RIOc) Module allows up to three Maxiflex remote I/O Bases to be connected to a Maxiflex Master Base. In addition, it can be used in redundant Maxiflex remote I/O and control applications.

Read More »
maxiflex - m1594a1600

Maxiflex RIOe Ethernet Remote IO Link Module

The M1594A Redundant I/O Ethernet Link Module designed specifically for redundant remote I/O and control applications, where high availability is required in hot standby configurations. It is used in conjunction with the M1267B (P3e-R) CPU module

Read More »
maxiflex - m1585b1600

Maxiflex Serial NIIM

Maxiflex Network Interface Module with one isolated RS232/485 Serial Port. Supports Conet/s, Modbus (Master/Slave; ASCII/RTU), or custom protocol (implemented in eziFORTH programming language on the module). Note This NIM is replaced by M1592A.

Read More »
maxiflex - m1592a1600

Maxiflex Serial NIM

Maxiflex Network Interface Module with one isolated RS232/485 Serial Port. Supports Conet/s, Modbus (Master/Slave; ASCII/RTU), or custom protocol (implemented in EZIFORTH programming language on the module). NB! USED AS REPLACEMENT FOR M1585 NIM

Read More »
maxiflex - m1595a1600

Maxiflex Standard Ethernet NIM

The M1595A Standard Ethernet NIM provides an additional Ethernet Network Connection to Maxiflex system. It also acts as a Remote I/O Scanner and allows connection up to 7 Maxiflex remote I/O Bases via Ethernet, ISaGRAF Ready; order CC030A-URTT to activate

Read More »

Category: Network Interface Modules