Maxiflex CPU T1C with Conet
5th April 2021
No Comments
Maxiflex T1 CPU-C with Serial Port, Program Port and Conet port. Programmable in Ezi Forth and Ezi List. Order M1831A programming cable if required.
Maxiflex T1 CPU-C with Serial Port, Program Port and Conet port. Programmable in Ezi Forth and Ezi List. Order M1831A programming cable if required.
Maxiflex T2 CPU with Serial Port, Program Port . Programmable in Ezi Forth and Ezi List. Order M1831A programming cable if required.
Maxiflex T2 CPU-C with Serial Port, Program Port, Conet Port. Programmable in Ezi Forth and Ezi List. Order M1831A programming cable if required.
Maxiflex T2 CPU-C with Serial Port, Program Port, Conet Port. Programmed with Maxitel Telemetry Application. Order M1831A programming cable if required.
Maxiflex T2 CPU-E with Serial Port, Program Port, Ethernet Port. Programmable in Ezi Forth and Ezi List. Order M1831A programming cable if required.
Maxiflex T2 CPU with Serial Port, Program Port, Conet/m Radio port . Programmable in Ezi Forth and Ezi List. Order M1831A programming cable if required.
Maxiflex T2 CPU with Serial Port, Program Port, Conet/m Radio port . Programmable in Ezi Forth and Ezi List. Order M1831A programming cable if required.
Maxiflex T3 CPU with Serial Port, Program Port . Programmable in Ezi Forth and Ezi List. Order M1831A programming cable if required.
Maxiflex T3 CPU-C with Serial Port, Program Port, Conet Port. Programmable in Ezi Forth and Ezi List. Order M1831A programming cable if required.
Maxiflex T3 CPU-E with Serial Port, Program Port, Ethernet Port. Programmable in Ezi Forth and Ezi List. Order M1831A programming cable if required.
Dual Hart NIM for Inteface to HART enabled devices to send and retrieve data
Dual Hart NIM for Inteface to HART enabled devices to send and retrieve data
Dual Hart NIM for Inteface to HART enabled devices to send and retrieve data
Dual Hart NIM for Inteface to HART enabled devices to send and retrieve data
Maxiflex Dual Modbus NIM. 2 Independent RS232/485 ports isolated. Supports Modbus Master, Modbus Slave and Conet/s. Programmable for other custom protocols.
Maxiflex Dummy Module. Used to blank unused I/O slot on base. Contains no pcb.
Maxiflex AC F Power Supply. 110/220Vac supply. Isolated 24Vdc for field loops. Plugs into I/O slots only (Not PSU slot).
The C2306A Time Synchronisation Module sensor is used to provide high accuracy time synchronisation in Maxiflex Sequence-Of-Event (SOE) applications
The C2306B Time Synchronisation Module sensor is used to provide high accuracy time synchronisation in Maxiflex Sequence-Of-Event (SOE) and PLC applications
Maxiflex Single GSM NIM. Connection cellular Networks using Integral GSM Modems. Connects to CPU via serial connection
NIM for Interface and data acquisition from Harwell AB96 Alpha/Beta monitors. AB 96 Protocol implimented on the NIM Serial Port. Superceded by M1588
Maxiflex NIM for interface to Canberra Harwell AB96, iCAM and G64
radiological monitors. A mixture of up to 32 of these Harwell monitors types
may be accommodated on a single RS485 multidrop network. (Supersedes M1587 AB 96 NIM)
Maxiflex NIM for interface to Canberra Harwell AB96, iCAM and G64
radiological monitors. A mixture of up to 32 of these Harwell monitors types may be accommodated on a single RS485 multidrop network. (Supersedes M1587 AB 96 NIM)
Maxiflex AC L Power Supply. 110/220Vac/dc supply. Logic power outputs for base, no field supply (for loops). Use M1151 PSU if field supply option is required.
Maxiflex AC LC Power Supply. 110/220Vac supply. Logic power outputs for base and 12Vdc charger for battery and field loops. Thermistor supplied for battery temp monitoring and charger rate control.
Maxiflex DC L Power Supply. 24Vdc supply with logic outputs for powering the base.
Maxiflex DC Logic Power Supply. 24Vdc input to the PSU provides the primary logic power for the base.
Maxiflex DC SLC Power Supply. 24Vdc or 12V solar panel supply. Built-in 3A charger for sealed lead-acid battery. Thermistor temperature sensor included. Extra external heatsink fitted. Used with 2 I/O Master Base Only
Maxiflex AC LF Power Supply. 110/220Vac supply. Logic power outputs for base and isolated 24Vdc 1A field supply (for loops).
Maxiflex AC Logic/Field Power Supply. 110/220Vac/dc input supply. Logic power outputs for base and isolated 24Vdc 1A field supply (for loops).
Maxiflex DC LF Power Supply. 48Vdc input supply with logic supply (5V and 12V) to Maxiflex base and an isolated field supply 24Vdc 1A (for field loops)
Maxiflex DC LF Power Supply. 48Vdc input supply with logic supply (5V and 12V) to Maxiflex base and an isolated field supply 24Vdc 1A (for field loops)
Maxiflex Single Programmable ETHERNET NIM. Single UTP Port; single TCP/IP connection. Modbus Serial over Ethernet or Modbus/TCP Slave Protocol support.
Maxiflex Single Programmable ETHERNET NIM. Single UTP Port; single TCP/IP connection. Modbus Serial over Ethernet or Modbus/TCP Slave Protocol support. Programmable in Forth only.
The Maxiflex Meter Prover Module is used in meter proving systems for Petroleum Measurement The Mx MP Module uses (PulseInterpolation) a method of “double-chronometry” for increasing the resolution of flow metering pulses when proving meters.
The Maxiflex Meter Prover Module is used in meter proving systems for Petroleum Measurement The Mx MP Module uses (Pulse Interpolation) a method of “double-chronometry” for increasing the resolution of flow metering pulses when proving meters.
The Maxiflex Meter Prover Module is used in meter proving systems for Petroleum Measurement The Mx MP Module uses (Pulse Interpolation) a method of “double-chronometry” for increasing the resolution of flow metering pulses when proving meters.
Maxiflex P4 CPU with Program port, 2 x Serial Ports, Ethernet Port and microSD card for datalogging.
Programmable in five ISaGRAF IEC61131 languages.
Panametrics Analyser NIM. Single RS232/485 Port isolated. Implementation of Panametrics Protocol on Serial Port.
Maxiflex Remote I/O Scanner fitted to remote I/O Racks in CPU Slot. Used with M1593A Remote I/O controller fitted in any I/O Slot on the Controller Rack with up to seven Maxiflex remote I/O Bases to be connected to the Maxiflex Master Controller Base.
Showing 81–120 of 128 results
