Omniterm LPI Loop Power Isolator
1st February 2021
No Comments
Omniterm LPI. Loop powered (4-20mA) Isolator which provides 1500Vrms isolation on any current loop. Ultra Low Volt drop in loop <3V.
Omniterm LPI. Loop powered (4-20mA) Isolator which provides 1500Vrms isolation on any current loop. Ultra Low Volt drop in loop <3V.
Omniterm LPI. Loop powered (4-20mA) Isolator which provides 1500Vrms isolation on any current loop. Ultra Low Volt drop in loop <3V. Fitted with 250Ohm Resistor for option of 1-5V output.
This DIN rail mount half-cell two-wire transmitter is designed for continuous monitoring of half-cells in cathodic protection systems in a single off-the-shelf product, using state-of-the-art digital measurement and filtering techniques.
Omniterm LPX. Ordered as a special version of LPI C2063. Loop powered (4-20mA) Isolator which provides 1500Vrms isolation on any current loop. Extended range 0-50mA and zero to 1000ohm load. Used for the 10-50mA loop interfaces.
Omniterm LPD. Dual Loop powered (4-20mA) Isolator that provides 1500Vrms isolation on any current loop. Ultra Low Volt drop on input <3V. with independent channels in a single 22.5mm wide housing.
Use the Omniterm LPR Current Loop Repeater to create an additional independently isolated current loop from a single 0-20/4-20mA current loop. The Omniterm LPR is 24Vdc powered and the output current loop is fully isolated from the input.
Use the Omniterm LPR Loop Repeater to increase 4-20mA drive capability, or add instruments to an existing current loop without affecting the integrity of the loop. The Omniterm LPR is 24Vdc powered and is fully isolated (input/output/powersupply).
Use the Omniterm LPS Current Loop Splitter to create two additional independently isolated current loops from a single 0-20/4-20mA current loop. The Omniterm LPS is 24Vdc powered and the outputs are fully isolated from the power supply.
Use the Omniterm LPS Current Loop Splitter to create two additional independently isolated current loops from a single 0-20/4-20mA current loop. The Omniterm LPS is 24Vdc powered and is fully isolated (input/output1/output2/power supply).
Omniterm TTB Current or Voltage Input 2 form C (Changeover Contacts 5A) Relays. 24Vdc Powered
Omniterm LZI. Loop powered (4-20mA) Isolator which provides 1500Vrms isolation, Surge Protection Discharge Current 10kA 8/20μs nominal. Low Volt drop on input <3V. Fitted with 250Ohm Resistor for option of 1-5V output.
Omniterm LZD. Dual Loop Powered (4-20mA) Isolator provides 1500Vrms isolation, Internal 250Ohm resistor and surge protection. Discharge Current 10kA 8/20μs nominal. Low Volt drop on input<3V. 2 independent channels in a single 22.5mm wide housing.
Omniterm LZB Input 2 Potential Free Contacts. Two Solid State Outputs with surge protection. Surge Current discharge protection 10kA 8/20μs nominal. Isolation 1500V Input to Output. Powered from 10 to 30Vdc.
Showing all 13 results
